• Code Free Access mode is available on locks CL505,
CL515 and CL525. This is signified by a button with
a black dot.
• Inside handle always retracts the latch for exit.
• Weather resistant.
• Vandal resistant, with stainless steel buttons,
and clutch protection if the outside handle is forced.
• Reversible handles.
• Fits doors between 35mm (1
3
/
8
”) and 60mm (2
3
/
8
”)
thick without modification.
BACK TO BACK VERSION ONLY
• Two coded plates are provided to allow coded access
in both directions.
• Butterfly spindle not required.
• For doors hung on the right, fit the silver spindle
in the front keypad and the coloured spindle
in the opposite side.
• For doors hung on the left, fit the coloured spindle
in the front keypad and the silver spindle in the
opposite side.
KEY OVERRIDE VERSION ONLY
• Two keys included.
• Lever handles supplied loose, and secured to the
lock on installation to suit the hand of your door.
CL520 / CL525 ONLY
• Split follower lock enables inside handle to retract
latch and deadbolt simultaneously, satisfying
‘means of escape’ requirements for exit at all times.
Prevents accidental lock-ins.
• Deadbolt thrown by key to lock out code users
after work hours.
• Key will retract the latchbolt giving access
for admin functions.
• Double euro profile cylinder with 3 keys.
• Any euro profile cylinder may be used.
• On multiple door installations consideration
should be given to having all cylinders keyed alike,
with restricted key issue, for ease of management.
FEATURES
To Next Page
Loading...
