CODELOCKS CL500 - Maintenance and Guarantee

24/9/2561 KA-01072 · Customer Self-Service
https://support.codelocks.com/knowledgebase/article/KA-01072/en-us 3/7
6. Replace the code chamber plate carefully with the 4 red screws.
7. Check the operation of the new code, and make a written note of it before reinstalling the lock.
8. (See below)

Maintenance
No maintenance of the working parts is necessary.DO NOT OIL.To maintain the finish the lock should be
cleaned regularly with a soft cloth. A silicone spray or similar should be used to provide a protective film
against grit and grime.
Guarantee
If any Codelocks mechanical lock should develop a fault, at any time due to manufacturing, just call the
Codelocks helpline and arrange for it to be repaired free of charge.

