Features
• Code Free Access mode is available on locks CL505, CL515 and CL525. This is signified by a button with a
black dot.
• Inside handle always retracts the latch for exit.
• Weather resistant.
• Vandal resistant, with stainless steel buttons, and clutch protection if the outside handle is forced.
• Reversible handles.
• Fits doors between 35mm (1 ⁄") and 60mm (2⁄") thick without modification.
Back to back version only
• Two coded plates are provided to allow coded access in both directions.
• Butterfly spindle not required.
• For doors hung on the right, fit the silver spindle in the front keypad and the coloured spindle in the
opposite side.
• For doors hung on the left, fit the coloured spindle in the front keypad and the silver spindle in the
opposite side.
CL520/CL525 ONLY
• Split follower lock enables inside handle to retract latch and deadbolt simultaneously, satisfying ‘means of
escape’ requirements for exit at all times. Prevents accidental lock-ins.
• Deadbolt thrown by key to lock out code users after work hours.
• Key will retract the latchbolt giving access for admin functions.
• Double euro profile cylinder with 3 keys.
• Any euro profile cylinder may be used.
• On multiple door installations consideration should be given to having all cylinders keyed alike, with
restricted key issue, for ease of management.
Models
To Next Page
Loading...
