Maintenance
20
5815EN-03
3.8 Inspection – safety devices
Protective and safety devices
Safety devices should be checked at regular intervals.
• Check the protective cover on the cleated chain conveyor return
chain.
• Drive units with chain slacks, have a slack protection for the con-
veyor chain. Check that the slack protection plates are in place,
and that the chain does not slacken enough to hang below the
plates.
• Check the protective cover for the conveyor chain on intermediate
drive units.
• There may be other types of guarding which are specific to your
installation, and these must also be checked. See the system
documentation.
To Next Page
Loading...