Coffee Queen Mega Gold A - Installation and Start-Up; Positioning; Water connection

ORIGINAL LINE A
19
Original instructions.
INSTALLATION AND START-UP
Positioning
Place the machine on a at horizontal surface that will support the weight of
the machine.
Min. 10cmMin. 10cm
Water connection
Connect the supplied water hose to the cold water connection using a ½’’
R-connection(A). When pushing the machine into position make sure there is
no interference to the hose to ensure proper water ow.
Water supply to the machine is the customer’s responsibility according to
instruction and advice from the supplier.
In areas with high level lime problem, a descaling lter should be mounted.
A
Note:
Make sure air is able to circulate behind the machine
(minimum 10cm).
i
Note:
The new hose set supplied with the appliance shall be used and
that old hose sets shall not be reused. Connection to a closable
valve is recommended. Min. water pressure; 2bar (200kPa). Max.
waterpressure; 8bar (800kPa).
i