l Thisproduct does not contain user-serviceable parts. Do not make
electrical or mechanical modificationsto product components.
Unauthorized modifications can void your warranty.
l Changes or modifications not expressly approved by the party responsible
for regulatory compliance could void the user’sauthorityto operate the
equipment.
l Include service loops with cable connections.
l Ensure that the cable bend radiusbeginsat least six inches from the
connector. Cable shielding can be degraded or cables can be damaged or
wear out faster if a service loop or bend radius istighter than 10X the cable
diameter.
l The vision system’sM/S connectors are not supported.
l Thisdevice should be used in accordance with the instructions in this
manual.
l All specifications are for reference purposesonly and can change without
notice.
Product Service
l Bring any performance issues to the attention of your Cognex sales
representative.
l The sensor can only be serviced by a trained Cognex representative.
Return the unit to Cognex for any service or repairs.
l Do not operate the sensor if the enclosure appears damaged.
14
To Next Page
Loading...
Need help?
General
