Vision System Specifications
Specification 3D-L4050 3D-L4100 3D-L4300
Operating Temperature
0ºC to 35ºC (32ºF to 95ºF) without heat sink
35ºC to 45ºC (95ºF to 113ºF) with heat sink
Storage Temperature -20ºC to 70ºC (-4ºF to 158ºF)
Humidity 20% to 80%, non-condensing (Operating and Storage)
Protection IP65 with all cables properly attached and M/S TRIG connectors capped.
Shock
15 G’s, 6 milliseconds half sinusoidal
Vibration 10 to 57, double amplitude 1.5 mm X,Y,Z, 3 hours in each direction
Cleaning and maintenance
Thischapter gives an overview about the cleaning and maintenance of the vision
system.
Clean the Housing
To clean the outside of the vision system housing, use a small amount of mild
detergent cleaner or isopropylalcohol on a cleaning cloth. Do not pour the cleaner
on the vision system housing.
CAUTION: Do not attempt to clean any In-Sight product with harsh or
corrosive solvents, including lye, methyl ethylketone (MEK) or gasoline.
5
To Next Page
Loading...
Need help?
General
