compacta_g - 02_05
MICRO, LOWER FRONT LID, PRODUCTION SIDE
Whenever you open front lid 301, a microswitch will stop the batch freezer in order to avoid
possible damages to the operator; when closing back the front lid, the beater will re-start.
5.1.1 Safety devices for the operator
This machine is fitted with safety devices on front lids in order to prevent accidents to the
operator.
HEAT PROTECTION ON FRONT LID - HEATING/MIXING SIDE
During heating cycle, the front lid relevant to cooking side reaches high temperatures; in order
to avoid damages to the operator, it has been protected with a heat shield 257.
Do not remove this protection during working cycles.
NOTE:
Do not touch the front lid, anyway, either during the heating phase (or cooking and mixing)
or in the next phases.
MICRO TOP FRONT LID HEATING
Whenever you open lid mouthpiece cover 290 or front lid 301, the beater is blocked in order
to avoid possible damages to the operator.
On closing the lid mouthpice cover back, the beater starts again.
257
301
290
To Next Page
Loading...
