5. Do not use metal foil on hotplate which may
block air flow. Overheating will result.
6. Do not remove or modify grounded power plug.
Use only properly grounded outlets to avoid
shock hazard.
7. Use appropriate hand and eye protection when
handling hazardous chemicals.
8. Gross weight of items placed on top of stirrers
should not exceed 25 lbs. (11.3 kg).
9. The top plate of the unit can remain hot for
some time after use. A “CAUTION - HOT TOP”
light will remain on until top plate temperature
cools to below 50°C.
10. Do not leave an active probe out of the fluid.
This may cause uncontrolled heating of the fluid
on the hotplate and unintentional boiling or an
explosion could occur.
11. Note that the exterior housing will be hot during
and for a period of time after use.
12. Refer servicing to qualified personnel.
4
SAFETY INFORMATION
To Next Page
Loading...