EasyManua.ls Logo

Cole Parmer StableTemp - General Specifications; Heating Specifications; Stirring Speed Specifications; Overall Dimensions

Default Icon
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
General Specifications
Heating Specifications
Accuracy of the temperature display vs. the actual average temperature ± 10.0°C
of a 2” diameter of setting area at the center of the top plate (setpoint 100°C unloaded).
Stirring Speed Specifications
Accuracy of the stirring setpoint (600 ml of water in a 100 ml glass flask above 200 rpm): ± 2.0%
Overall Dimensions - W x H x D
All Models: 8.2 x 8.2 x 8.2” (20.8 x 20.8 x 20.8 cm)
Top Plate Dimensions - W x H x D
All Models: 7.25 x 7.25 x 7.25” (18.4 x 18.4 x 18.4 cm)
Weight
All Models: 11 lbs. (5.0 kg)
* These digital plates do not cool. The minimum temperature is 1°C if used in a cold room below 1°C.
Electrical Temperature Speed Top Plate
Catalog # (Volts/Amps/Watts/Freq./Phase) Range Range Capacity
Hotplates:
03405-40 120/8.8/1060/60/1 1-540°C N/A 4L flask - 25 lbs.
03405-45 220-240/4.8/1150/50-60/1 1-540°C N/A 4L flask - 25 lbs.
Stirring Hotplates:
03407-40 120/8.9/1070/60/1 1-540°C 60-1200 4L flask - 25 lbs.
03407-45 220-240/4.9/1170/50-60/1 1-540°C 60-1200 4L flask - 25 lbs.

Related product manuals