Cole Parmer StableTemp

Questions and Answers

S
Shannon OwenAug 14, 2025
What to do if Cole Parmer StableTemp Cooktop shows E12 error?
- R
  Robin RamirezAug 14, 2025
  If your Cole Parmer Cooktop displays error code E12, it indicates a problem with the motor. This could be due to a locked rotor, a failure in the motor itself, a failure in the motor optocoupler/triac circuit, or a failure in the motor optical encoder/encoder wheel. Try freeing the locked rotor. If that doesn't work, you may need to replace the motor, the control board, or the motor optical encoder.
J
Jorge WillisAug 17, 2025
How to fix E01 error on Cole Parmer Cooktop?
- M
  Mrs. Kelly WheelerAug 17, 2025
  If your Cole Parmer Cooktop displays error code E01, it means there is an issue with the internal thermocouple connection. This could be due to the thermocouple not being connected, an open thermocouple, or the thermocouple being connected backwards (reversed polarity). Ensure the thermocouple is properly connected with correct polarity. If the issue persists, replace the thermocouple.
D
dgrayAug 21, 2025
What does E07 mean on a Cole Parmer Cooktop?
- S
  stevensonginaAug 21, 2025
  If your Cole Parmer Cooktop displays error code E07, it indicates a problem with the internal or OTP thermocouple. This could be due to the thermocouple not being connected, a short circuit, or being connected backwards (reversed polarity). Ensure the affected thermocouple is properly connected with the correct polarity and that any short is removed.
D
Dawn WhiteAug 25, 2025
Why does my Cole Parmer Cooktop show E02 error?
- S
  stephensonwilliamAug 25, 2025
  If your Cole Parmer Cooktop displays error code E02, it indicates a failure related to the internal thermocouple, element, or optocoupler/triac circuit. This could be due to a short circuit in the internal thermocouple, a failure in the internal thermocouple or element, or a failure in the optocoupler/triac circuit. Remove any short. You may need to replace the thermocouple, the element, or the control board.
T
Trevor StaffordAug 27, 2025
What to do if Cole Parmer StableTemp displays E03 error?
- E
  emilyharringtonAug 27, 2025
  If your Cole Parmer Cooktop displays error code E03, it indicates a problem with the external probe. This can happen if the external probe is left out of the solution, the OTP potentiometer is set too low, the user selected timeout is too short, or the external probe is connected backwards. Place the external probe into the solution, increase the OTP setting, increase the external probe timeout, or correct the orientation of the external probe.
M
Matthew KiddAug 31, 2025
How to resolve E06 error on Cole Parmer StableTemp?
- R
  ryanhallAug 31, 2025
  If your Cole Parmer Cooktop displays error code E06, it means the OTP thermocouple temperature is above the OTP potentiometer setting or the OTP thermocouple is not connected. Increase the OTP potentiometer setting, reduce the hotplate setpoint, or ensure the OTP thermocouple is properly connected with correct polarity.
L
Lawrence ChanSep 3, 2025
What causes E11 error on Cole Parmer Cooktop?
- J
  James CooleySep 3, 2025
  If your Cole Parmer Cooktop displays error code E11, it indicates a failure in the AC power detection (zero cross) circuit. To resolve this, the control board needs to be replaced.
Z
zwhiteSep 6, 2025
What does it mean if my Cole Parmer StableTemp Cooktop display is blank and beeping?
- A
  Austin CastroSep 7, 2025
  If your Cole Parmer Cooktop has a blank display and is beeping continuously, it indicates a checksum failure during unit initialization. To fix this, replace or reprogram the control board.
L
laurie11Sep 9, 2025
What does E04 error mean on Cole Parmer Cooktop?
- K
  Kevin PopeSep 9, 2025
  If your Cole Parmer Cooktop displays error code E04, it indicates an OTP circuit failure. The suggested solution is to replace the control board.