390
163
390
250
163
2-M8 bolt
2-M8 nut
Fig.1
PEDESTAL FIXING Fig.1
EN60335-2-41 TEST standard requires the filter pump
must be vertically fixedon ground or a certain pedestal
made of wood or concrete before use. There should be
two holes 9mm in diameter on the pedestal, the space
between which should be 163mm. Put filter pump on the
pedestal and fix them together by fasten the bolts and
nuts. All the pedestal parts should weigh over 18kgs at
least to prevent the pump from accidental falling.
P61318ASS16
P6680ASS16
A
P6916ASS16
B
Operation
1) Open/unscrew the Air Purge Valve on the top of the Filter Pump; air is released as water fills the Filter Pump.
2) When water comes out of the Air Purge Valve screw it closed and wipe away any water.
3) Test the GFCI plug.
RESET
TEST
RESET
TEST
RESET
TEST
A B
C
D
GFCI Test
7
To Next Page
Loading...
