4-9 Control Functions
If there are more than one fault code, they will be
shown in rolling sequence. The fault codes are
present, in order to see the time press the clock
button, the time will be shown. Then after five
seconds, the fault code returns again. Only after
the fault is fixed, will the time show automatically.
The description for the fault codes are shown in
Chapter 11 of this manual.
Fuel Level Indicator
The fuel level display will indicate the fuel volume.
When fuel tank is full the display will show five
white bars (1). As the fuel level decreases, the
white bars will disappear (2). When fuel is almost
empty, the display will begin to flash red.
1
2
To Next Page
Loading...
