Coleman HS400UTV-5 - On -Command Four-Wheel; Differential Gear Lock Switches

4-11 Control Functions
On -Command Four-Wheel –Drive and
Dierential Gear Lock Switches
1. On-Command four-wheel –drive switch “2WD”/ “4 WD”
2. Differential gear lock switch “LOCK”/ “ 2WD”
This vehicle is equipped with an On-Command
four–wheel-drive switch “2WD”/ “4WD”and a
dierential gear lock switch “4WD”/ “LOCK”.
Select the appropriate drive according to
terrain and the conditions.
 Two-wheel drive (”2WD”): Power is sup -
plied to the rear wheels only.
 Four-wheel drive (“4WD” ): Power is
supplied to the rear and fr
ont whee
ls.
 Four–wheel drive with the differential
gear locked (“4WD -LOCK”): Power is
supplied to the rear and front wheels
when the differential gear is locked.
Unlike the 4WD mode, all wheels turn at
the same speed regardless of traction.