Collective Minds Switch Up - Xbox Controller Pairing

1. Ensure your Switch Up
TM 
device is plugged into the Switch
TM
Dock.

2. Ensure your wireless PlayStation 4
TM
controller is off.
3. Place your PlayStation 4
TM
controller into Bluetooth pairing mode by holding the
SHARE and HOME buttons for 5 seconds or until the light bar flashes WHITE. 
4. Now press the Bluetooth pairing button on the Switch Up
TM 
device. The LED will
flash BLUE to show Bluetooth pairing has begun.
5. Within a few seconds the LED will be WHITE indicating that pairing is complete.
6. The light bar on the PlayStation 4
TM
controller should be BLUE and you are now
connected to the Switch Up
TM 
device and ready to use your PlayStation 4
TM

controller wirelessly.

PlayStation 3 
TM 
Wireless Controller Pairing  - Connect the PlayStation 3
TM
controller via a
wired connection first. Then remove the wired connection and your PlayStation 3
TM

controller will automatically pair to Switch Up
TM 
device. Step by
Step Instructions below.

1. Ensure your Switch Up
TM 
device is plugged into the
Switch
TM
Dock.

2. Plug your PlayStation 3
TM
controller into your Switch Up
TM

device. The Player LED indicator on your PlayStation 3
TM

controller will light up.
3. Now remove the wired connection, and your PlayStation 3
TM
controller Player LED
indicators will begin to flash.
4. After a few seconds only one Player LED indicator will light up.
5. You are now connected to the Switch Up
TM 
device and ready to use your
PlayStation 3
TM
controller wirelessly.

Xbox One 
TM 
Wireless Bluetooth Controller Pairing  - Simply put your Xbox
TM
controller into
sync mode and press the Bluetooth Sync button on your Switch Up
TM
device. Step by
Step Instructions below.

1. Ensure your Switch Up
TM 
device is plugged into the
Switch
TM
Dock.

2. Turn on your Xbox One
TM
Wireless Bluetooth Controller.
3. Press the SYNC button on your controller.