Switch Up
TM
Manual V1.2
For videos and tutorials and more information about the Switch Up
TM
device please visit:
https://www.switch-up.ca
WARNING: READ THIS BEFORE
ATTEMPTING TO USE YOUR SWITCH UP
DEVICE
BEFORE YOU CONNECT THE SWITCH UP
TM
DEVICE TO THE SWITCH
TM
DOCK, YOU
MUST NAVIGATE TO THE SWITCH
TM
“SYSTEM SETTINGS” AND SET “PRO
CONTROLLER WIRED COMMUNICATION” TO “ON”. Not doing so will result in an
“Error Code 2011-0301”, requiring you to disconnect the Switch Up
TM
from the console,
then reboot the Switch
TM
, and then change the setting to “ON”. You can now plug in
your Switch Up
TM
and enjoy without issue.