2120
DESCRIPTION MAXIMUM TORQUE
(approx.)
TOOL
CC01
Handlebar rear screws
6 Nm 3 mm Allen key
Standard stem bolts
(fork)
5 Nm 4 mm Allen key
Standard stem bolts
(handlebar)
5 Nm 4 mm Allen key
Fork Expander Bolt 4 Nm 6 mm Allen key
Integrated Levers’ Collar 10 Nm 5 mm Allen key
(T25 Campagnolo)
Colnago
Bottom Bracket cups
25-30 Nm T47 key
Standard Bottom Bracket 30-35 Nm See maker instructions
Colnago Seatpost
Clamp bolt
5 Nm 4 mm Allen key
Colnago rear Saddle
Clamp bolt
8 Nm 5 mm Allen key
Torque
settings tab
WHY COLNAGO SUGGESTS
THE USE OF THE TORQUE WRENCH
REASONS WHY TO USE
THE TORQUE WRENCH
Colnago is concerned about the resistance and quality of their
frames. In order to guarantee the perfect conservation and durability
of the frame over time, is important to mantain it correctly, by using
a torque wrench.
1. Ensuring the frame and components are not overtightned which
can cause damage or from components loosening from being under
tightened. Cracks and damages caused by overtightening the bolts
are not covered by Colnago Warranty.
2. Avoiding any harm to the cyclist whilst riding, due to the failure of
incorrect instalation.
3. Frameset and components benefit from a longer lifespan, even
after multiple maintenance and service schedules during its lifetime.
Torque settings tab
To Next Page
Loading...
Need help?
General
