Need help?Do you have a question about the Colnago C68 and is the answer not in the manual?
Insert cables into the handlebar for integrated routing.
Ensure orange and purple connectors exit the right dropbar.
Route grey connector through the central hole and stem.
Use a hooked instrument for routing cables through handlebar bends.
Confirm cable exit points: right (purple/orange), center (grey), left (blue).
Round hydraulic hose ends to ease routing through the handlebar.
Route cables using a guiding object like a shifter cable.
Fix shifters, connect EPS cable and hydraulic hoses as instructed.
Cockpit ready; cables inside stem; adjust spacers and cover brake line.
Prepare the power unit for installation.
Insert power unit cables through the seat tube.
Gather cables outside the right side of the bottom bracket shell.
Route EPS groupset cables for each position per instructions.
Continue routing EPS groupset cables for each position.
Connect the hydraulic brake hose to the rear brake caliper.
Connect the hydraulic brake hose to the rear brake caliper.
Ensure EPS cables are positioned between the two hydraulic hoses.
Route the front brake hose through the head tube.
Insert the front brake hose into the fork via the front hole.
Connect the cable to the EPS interface unit as specified.
Connect the EPS cable to the rear derailleur.
Connect the EPS cable to the front derailleur.
Bolt the rear brake caliper onto the chain stay.
Bolt the front brake caliper to the fork leg.
Connect both brake hoses to their respective brake calipers.
Apply grease to bottom bracket cup threads before installation.
Thread cups in with the plastic cable-guiding cylinder.
Lock cups using the T47 tool; torque setting reference.
The C68 frame is now ready for further component fitting.
Torque specifications for handlebar and stem components.
Torque specifications for Colnago and standard bottom brackets.
Torque specifications for Colnago seatpost clamp bolts.
Torque specs for bottle cages, axles, calipers, pedals, and derailleurs.
Insert cables into the handlebar for integrated routing.
Ensure orange and purple connectors exit the right dropbar.
Route grey connector through the central hole and stem.
Use a hooked instrument for routing cables through handlebar bends.
Confirm cable exit points: right (purple/orange), center (grey), left (blue).
Round hydraulic hose ends to ease routing through the handlebar.
Route cables using a guiding object like a shifter cable.
Fix shifters, connect EPS cable and hydraulic hoses as instructed.
Cockpit ready; cables inside stem; adjust spacers and cover brake line.
Prepare the power unit for installation.
Insert power unit cables through the seat tube.
Gather cables outside the right side of the bottom bracket shell.
Route EPS groupset cables for each position per instructions.
Continue routing EPS groupset cables for each position.
Connect the hydraulic brake hose to the rear brake caliper.
Connect the hydraulic brake hose to the rear brake caliper.
Ensure EPS cables are positioned between the two hydraulic hoses.
Route the front brake hose through the head tube.
Insert the front brake hose into the fork via the front hole.
Connect the cable to the EPS interface unit as specified.
Connect the EPS cable to the rear derailleur.
Connect the EPS cable to the front derailleur.
Bolt the rear brake caliper onto the chain stay.
Bolt the front brake caliper to the fork leg.
Connect both brake hoses to their respective brake calipers.
Apply grease to bottom bracket cup threads before installation.
Thread cups in with the plastic cable-guiding cylinder.
Lock cups using the T47 tool; torque setting reference.
The C68 frame is now ready for further component fitting.
Torque specifications for handlebar and stem components.
Torque specifications for Colnago and standard bottom brackets.
Torque specifications for Colnago seatpost clamp bolts.
Torque specs for bottle cages, axles, calipers, pedals, and derailleurs.
General| Frame Material | Carbon Fiber |
|---|---|
| Fork Material | Carbon Fiber |
| Brake Type | Hydraulic Disc |
| Wheel Size | 700c |
| Groupset | Shimano Dura-Ace Di2 |
| Tires | Continental Grand Prix |
| Stem | Integrated |
| Saddle | Selle Italia |
| Seatpost | Carbon |
| Brakes | Shimano Dura-Ace |
| Wheelset | Fulcrum |
To Next Page