Getting Started
Clock Display Modes
The clock display will automatically turn ON
after batteries are installed. The clock will
show the time by default.
• Press the [ADJ] button once to display the
alarm time.
• Press the [ADJ] button a 2nd time to display
the date (MMDD).
• Press the [ADJ] button a 3rd time to display
the seconds.
• Press a 4th time to return to the time.
Note: the clock will automatically return to time display if no button is
pressed after several seconds.
SET
ADJ
Setting the Clock Time and Date
1. Press the [SET] button 4 times. The current month (1-12)
will be displayed. Press the [ADJ] button to increase the month
to the desired digit, then press [SET] to save. The current
day will now be displayed.
2. Press the [ADJ] button to increase the day to the desired digit,
then press [SET] to save.
3. Repeat the above step to set the hour (AM/PM) and then
minute of the current time. The clock will return to default
time display.
To Next Page
Loading...