Turning the Alarm ON/OFF
Press the [SET] button. The alarm clock time will blink.
• Press [ADJ] once to turn the alarm ON. The [ ] icon will appear
at the top of the display, indicating that the alarm is on.
• Press [ADJ] a 2nd time to turn both the alarm and the hourly
tone ON. The [ ] and [ ] icons will appear on the display.
• Press [ADJ] a 3rd time to turn the alarm OFF but keep the
hourly tone ON. The [ ] icon only will appear on the display.
• Press [ADJ] a 4th time to turn both the alarm and the hourly
tone OFF. Neither icon will appear on the display.
If you have changed the previous settings, press [SET] 3 times
to save and return to time display. Otherwise, press [SET] 7 times
to return to time display.
Setting the Alarm Time
1. Press the [SET] button. The alarm clock time will blink, with
“A L” appearing in the middle of the numbers. Press [SET]
again. The hour of the alarm time will ash, along with “A”
or “P” indicating AM or PM.
2. Press the [ADJ] button to increase the alarm time hour to
the desired digit, then press [SET] to save. The alarm time
minute will now blink.
3. Press the [ADJ] button to increase the alarm time minute to
the desired digit, then press [SET] to save. The alarm time
will be saved, and the clock will return to default time display.
Note: If you do not turn change any alarm settings, the clock will continue
on to setting the date and current time.
To Next Page
Loading...