Coltene SPEC 3 User Manual (English)

Questions and Answers:

D
Dana BradyAug 3, 2025
How to fix Coltene SPEC 3 Lighting Equipment if the Shot or Mode button doesn’t light up?
- J
  James JonesAug 3, 2025
  If the Shot or Mode button on your Coltene Lighting Equipment doesn't light up, try these steps: 1. Remove the battery pack and reinsert it to reset the device. 2. Place the handpiece on the charger base until the red light turns green, indicating a full charge. 3. Make sure the power adapter is securely plugged into the charger base. 4. Check that the AC power cord is securely plugged into both the power adapter and the wall outlet.
N
Nicole LevyAug 13, 2025
What to do if Coltene Lighting Equipment S.P.E.C. 3® LED Curing Light doesn’t polymerize light-cured materials well?
- M
  Matthew RochaAug 13, 2025
  If the S.P.E.C. 3® LED Curing Light from Coltene Lighting Equipment isn’t polymerizing light-cured materials well, consider the following: * Ensure that a blue LED light is emitted from the light guide. * Make sure the light guide is fully inserted into the opening on the handpiece. * Check the light guide for any damage. * Check for any debris, such as resin residue or sealant, on the tip of the light guide. * Ensure that the appropriate mode and time setting are selected according to the type of light-cured material being used. * Make sure the light cured dental material is stored according to the manufacturer’s suggested storage and that the date on the material’s package has not expired.
J
Jason CrossAug 25, 2025
What to do if Coltene Lighting Equipment Shot or Mode button lights up but doesn’t work properly?
- L
  Lauren ClarkAug 25, 2025
  If the Shot or Mode button on your Coltene Lighting Equipment lights up but doesn't work properly: * Place the handpiece on the charger base to recharge until the red light changes to the green illuminated light, indicating a fully charged curing light. * If the curing light still does not activate, the unit requires service. Please contact your supplier or authorized service center.