Colzer 1556 - Cleaning and Maintenance

Replacement of Filters
Replacement of Filter
① Put your hand on the hand clasp position
of filter mesh cover, and pull it outwards
gently.
② Move upward to remove the filter mesh cover.
④ Remove all packaging films on filter meshes.③ Take out the new filter meshes with plastic
film in the machine.Take out the new filter
meshes with plastic film in the machine.
⑤ Assemble the new filter meshes. ⑤ Assemble the filter mesh cover and reset the
service life of filter mesh (details can be seen
on Page 10 for operation of filter mesh service
life reset key).
9
Cleaning and Maintenance
Symbol MeaningName
Timer
ECO
Speed
Cleaning and Maintenance
Standby status, press “Timer” button to set start-up time. Operating status, press
“Timer” button to set shutdown time. If the timer set as “0”, the timer function is
canceled.
Standby status, press “Speed” Button once, the wind speed gear plus +1 gear. Gear 1~5
is a cycle. When the wind speed is settled, and displayed for 3s,display switches to PM2.5
display status.In Auto mode, press the “Speed” button to switch to manual mode.
The power plug must be unplugged before maintenance of the machine.
Note: Do not scratch the appliance shell with a hard object; Please read
carefully and follow the Instruction Manual to clean the appliance
parts.
1. Cleaning of appliance body
2. Cleaning and replacement of filter
Suggestions: Clean the filter at an interval of 1 month; if the operating
environment is poor, increase the cleaning frequency.
1) Wipe off the stain with soft cloth.
2) The stubborn stain that cannot be wiped off easily can be wiped off with soft cloth dipped with an
appropriate amount of mild detergent.
1) The user will be reminded of replacement of filter by built-in program; however, the service cycle of
filter may be different according to the pollution degree of actual application environment, and the filter
can be replaced in time according to the volume of sound and odor given off by the appliance.
2) When there is dust on the surface of composite filter, remove it with dust collector, so as to extend
the usage period of filter. (It is advised to clean the filter at an interval of 1 month)
Composite
Filter
Replacement Period
Condition
The filter shall be replaced at an
interval of about 6 months.
Absorb the emission amount of 3
cigarettes every day
According to the application place and use method (e.g. the family where there are many cigarette
smokers), the replacement period of filter may be shortened; in a word, please replace the filter
when the filtration effect is poor.
The used filter shall be disposed of as non-combustible refuse.
8
When the machine is in working mode, press Energy saving button, the machine will
enter the energy saving mode, and the display will be turn off. When the machine is
in energy saving mode, press the button, exit energy saving mode, and the display
will be light on.