COMAC SIMPLA 50B-BT - Page 4

ADJUSTMENTS
AND
TESTING
SIMPLA 50B-BT
SIMPLA 55BT
SIMPLA 65BT
SIMPLA 50BST
Doc. 10021896
Issued 09/2010
Ver. AB
Page 4 of 16
Check the functioning of the “service menu”. Remember that to access it, you must keep the
button pressed while starting up the machine (when you turn the key).
Keeping the button pressed for
a few seconds will zero-set the
total hour-counter (only in the
first hour of operation).
Pressing the button
Keeping the button pressed
for a few seconds will zero-
set partial hour-counter 1.
Pressing the button
Pressing
the button
Keeping the button pressed for
a few seconds will zero-set
partial hour-counter 2.
Pressing the button
Keeping the button pressed for
a few seconds will change the
battery technology setting.
Keeping the button pressed
for a few seconds will give
you access to the “service”
sub-menu: every time the
button is subsequently
pressed, the setting will
Pressing the button
Pressing the button
Pressing the button
Keeping the button pressed for a
few seconds will zero-set the
number of loads.
Pressing the button