What to do if COMAC Floor Machine doesn't start?
If your COMAC Floor Machine isn't starting, there are a few things you can check: * Ensure the batteries are fully charged. * Verify that the electric system connector is securely connected to the battery connector. * Confirm that the key switch is in the ON/I position.
Why is there insufficient water on the brushes of my COMAC Floor Machine?
If you're experiencing insufficient water on the brushes of your COMAC Floor Machine, please check the following: 1. Make sure there is water in the solution tank. 2. Verify that the water/detergent solution release adjustment knob is open. 3. Clean the solution filter located at the front of the machine.
What to do if COMAC INNOVA 55B Floor Machine squeegee does not dry perfectly?
If the squeegee on your COMAC Floor Machine isn't drying perfectly, ensure that the squeegee is clean. Also, check the squeegee settings.
Instructions for unpacking, handling, and safely moving the machine.
Identifies elements on the instrument panel, steering column, and footboard.
Details components located on the left side and rear of the machine.
Covers front machine elements, battery types, and maintenance/disposal.
Instructions for safely handling and inserting batteries into the machine's compartment.
Details battery connection and charger setup for versions without an onboard charger.
Instructions for connecting chargers and understanding the battery charge indicator.
Covers the hour meter, forward work speed, and related operational controls.
Information on the solution tank, including filling procedures and checks.
Instructions for filling the solution tank and regulating detergent flow.
Checks for the recovery tank and steps for assembling the squeegee.
Guidance on adjusting squeegee inclination/height and assembling brushes.
Information on the optional blinking light and the solution tank level indicator.
Detailed steps and checks for operating the machine safely and effectively.
Explains the function and activation of the 'ECO' mode for increased working capacity.
Describes the machine's protection mechanism against overfilling of the recovery tank.
Details the function and use of the emergency stop button for immediate machine shutdown.
Procedures for shutting down the machine and performing post-work cleaning and checks.
Instructions for cleaning and emptying the machine's recovery tank.
Details on how to clean the float assembly within the recovery tank.
Procedures for cleaning the squeegee, its rubbers, and the vacuum nozzle.
Steps for cleaning the filter in the solution tank for optimal performance.
Guidance on cleaning the vacuum hose if vacuum performance is unsatisfactory.
Instructions for thoroughly cleaning the brush to maintain working capacity.
Steps for replacing the front squeegee rubber for proper vacuum and drying.
Instructions for replacing or turning the rear squeegee rubber for better drying.
Procedure for replacing the brush to ensure optimal machine working capacity.
Troubleshooting steps for when the machine fails to start.
Diagnosing and resolving issues related to insufficient water supply to brushes.
Steps to troubleshoot and fix imperfect drying performance of the squeegee.
Troubleshooting guide for when the machine is not cleaning effectively.
General| Brand | COMAC |
|---|---|
| Model | INNOVA 55B |
| Category | Floor Machine |
| Language | English |
To Next Page
