3. Position the brush on the floor, near the machine brush head
4. Lower the brush head, turning the right-hand lever (1) to move it clockwise.
5. Press the brush release button (2) intermittently
WARNING: During this operation, check there are no people or objects near
the brush.
ATTENTION: Check the brush is correctly inserted. If this is not the case, the
machine could move in an irregular, sudden manner.
26. BLINKING LIGHT (OPTIONAL)
The machine can be equipped with a blinking light that turns on automatically when the key in the main
switch is turned on.
27. EMPTY SOLUTION TANK DEVICE
To check the quantity of water in the solution tank there is a suitable level indicator tube (1) placed in front
of the driver seat.
To Next Page
Loading...
