8. FRONT MACHINE ELEMENTS
The elements on the front of the machine are:
21. Item-holder tray
22. Storage compartment carter
23. Detergent solution filter
24. Detergent tank drainage tap
To power the machine it is necessary to use:
liquid-electrolyte lead traction batteries
sealed traction batteries with gas recombination or gel technology.
OTHER TYPES MUST NOT BE USED.
The batteries must meet the requirements laid out in the norms: CEI EN 60254-1:2005-12 (CEI 21-5) + CEI
EN 60254-2:2008-06 (CEI 21-7)
For a good operating performance, we suggest the use of two 12V - 105 Ah/C5 batteries
10. BATTERY MAINTENANCE AND DISPOSAL
For maintenance and recharging, respect the instructions provided by the battery manufacturer.
Particular attention must be paid when choosing the battery charger, if not supplied, since there are
different kinds according to the type and capacity of the battery.
When the battery reaches the end of its working life, it must be disconnected by expert, trained personnel
then removed from the battery compartment with the aid of suitable lifting devices. DEAD BATTERIES
RE CLASSIFIED AS DANGEROUS WASTE AND MUST BE DELIVERED TO THE AUTHORISED
BODIES FOR CORRECT DISPOSAL.
WARNING: You are advised to always wear protective gloves, to avoid the risk
of serious injury to your hands.
WARNING: You are advised to only lift and move the batteries with lifting and
transportation means suitable for the specific weight and size
To Next Page
Loading...
