47
RECALL
By pressing the RECALL key, you will change over to the
previously selected channel.
Acoustic signal for directing the satellite
antenna
For this purpose, press the “INFO” key. Apart from the current
reception parameters, you will get information on the signal
strength and quality.
Additionally, you can activate an acoustic
signal by pressing key 1.
An acoustic signal is transmitted via the
TV set. A stronger and higher signal
indicates a better direction of the antenna.
Sleep timer
You can go to the sleep timer in normal mode by pressing key 0.
You have the following setting options: off, 10, 30, 60, 90, 120
minutes.
After this time, the receiver will be switched off
automatically.
Pause
For this purpose, press the “PAUSE” key. The TV image will be
"frozen“.
By pressing the "PAUSE" key again, it will be deactivated.
To Next Page
Loading...