InteliLite 4 AMF20+AMF25 Operator Guide 20
management alarms appear. Detailed description of situation when the alarms are active are described
below:
Wrn Production Mode is present in the alarm list all the time while production mode is turned on. To
turn off the Production mode go to Usermanagement and uncheck the checkbox Production mode
orgo to Production Mode display screen and select disable.
Wrn Default Password appears in alarmlist when the default administratorpassword is set and
communication module is plugged in the controller. The purpose of alarm is to inform that the
controllermight be oris connected to the untrusted interface and cybersecurity rules are not fulfilled due
to default administratorpassword.
Wrn Password reset e-mail addr is not setappears in alarmlist when there is no email address set
and the administratorpassword is not the default one. The purpose of alarm is to inform that there is
possibility that the controllermight not be accessible by administratorpassword due to forgotten
password reason. Password reset procedure cannot be performed without filled email address. To fill
out email address, the administratorpassword is required.
6 back to Browsing alarms
To Next Page
Loading...
Need help?
General
