2
Physical Details - xCam2
Front - xCam2
Figure 1: Front Panel
IR LEDs
IR LEDs provide illumination at night or in a dark environment.
Light Sensor
It supports light sensor to provide automatic day/night mode
transition.
Lens
No physical adjustment is required or possible for the lens, but you
should ensure that the lens cover remain clean. The image quality is
degraded if the lens cover is dirty or smudged.
POWER indicator
(Blue/White)
On (Solid Blue) - The xCam2 is working normally.
Flashing (Slow Blink White) - The xCam2 is in WPS mode.
Flashing (Double Blink White) - The xCam2 is connected to router
and ready to pair.
2-Way Voice (Slow Blink Blue) – Someone is talking
On (Solid Amber) - The xCam2 is not connected to a router or has
trouble connecting.
Microphone hole
Light sensor hole
To Next Page
Loading...
Need help?
General
