6. SELECT
EDIT.
7. Make your speed dial route selection choice
from the list on the LCD by pressing the appro
-
priate button.
•
PRESS line button to select outside line,
•
DIAL 00 to select prime line or last line
used.
•
DIAL 01 to 16 to select line
group.
•
PRESS INTERCOM button or dial 8 to se
-
lect intercom.
NOTE: You may need a pause between numbers to compensate for differ
-
ences in response time between your system and the host system (ask your
attendant about this). To store a pause, press HOLD, then continue dialing. If
your system is behind a host system that needs a hookflash to access a
feature, press TAP to store a hookflash, then continue dialing.
8. DIAL number (up to 16 digits long, include *
and # if needed).
9. SELECT
DONE
to store the number.
10. REPEAT previous steps until all numbers are
stored, OR SELECT
EXIT
.
11. PRESS SPEAKER to end.
Large Screen Display Speakerphone Station User’s Guide 59
GCA70-349 Programming
Select Line
Select Line Group
Select Prime/Last Line
Select Intercom
ARS
PREVEXIT
Selecting Line or Intercom
0123456789*#
Pause (p)
Flash (f)
ERASE DONEENTER
Dialing a Speed Number
To Next Page
Loading...
