Comdial DX-80 - Page 130

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-80
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Program CO Lines for Day Ringing Assignment (02-ccc-13-01-01):
• Input 02-ccc-13-01-01 (where “ccc” = the CO Line directory number 740-755 to be programmed). The first of
six Members (ringing destinations) displays.
• Press [
save
savesave
save].
• Press [chg
chgchg
chg] to change this member.
Or...
• Press [
next
nextnext
next] to select the next programmable member for ringing assignment.
• When the Member for change displays, press [chg
chgchg
chg].
• Input the directory number where Day mode ringing for this CO line is necessary. (Extensions: 101-156;
Hunt Groups: 410-433; Virtual Numbers 700-729.)
• Press [
save
savesave
save]. The data is stored.
• To program other Members press [next
nextnext
next] or [back
backback
back] to select the Member to change and repeat the process.
• Continue making other programming changes or exit the programming mode.
Program CO Lines for the Evening Ring Assignment (02-ccc-13-02):
• Input 02-ccc-13-02 (where “ccc” = the CO Line directory number 740-755 to be programmed). The first of
six possible Members (destinations) displays.
• Press [
chg
chgchg
chg] to change the Evening assignment.
• Input the directory number where Evening mode ringing for this CO line is necessary. (Extensions: 101-156;
Hunt Groups: 410-433; Virtual Numbers 700-729.)
• Press [save
savesave
save]. The data is stored.
• Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “CO Line.” Then press «.
• Use
¢£¤¥ to highlight “Answering Position.” Then press «.
• Use ¢£¤¥ to highlight the Day Member or Evening ringing destination for the CO Line (CO Line
numbers are listed vertically along the left side of the screen). Then press
«.