DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-92
Operation – Forcedly Release a Conference Member (Conference Controller Only)
1. While engaged in a conference the display shows:
XXX XXX XXX
private forced
2. Press [forced
forcedforced
forced]
PRESS DIR#
exit
3. Press [exit
exitexit
exit] to abort the operation and return to the conference.
Or…
Dial the directory number (CO Line number or Extension number) to release. (You may also simply press
the CO Line button or DSS button of the CO Line/extension to be released.)
That conference member is disconnected and you are rejoined in conference with the remaining members.
4. Hang up to end the Conference.
Operation – Private Connection with a Conference Member (Conference Controller Only)
1. While engaged in a conference the display shows:
XXX XXX XXX
private forced
2. Press [private
privateprivate
private]
PRESS DIR#
exit
3. Press [exit
exitexit
exit] to abort the operation and return to the conference.
Or…
Dial the directory number (CO Line number or Extension number) to connect. (You may also simply press
the CO Line button or DSS button of the CO Line/extension to be connected.)
That conference party is removed from the conference and connected to you.
4. You may re-establish the conference with all members by pressing
the Conference button.
Or…
Hang up on the current connection and rejoin the remaining member(s) by pressing
the Hold button.
Hang up to end the conference/connection.
Conditions
a) The extension that establishes a conference is called the controlling party.
b) Only the conference controller can add a new conference connection (party).
c) Only the controlling party is allowed to invite or forcibly release any attending internal or external party, or to
setup a “private talk” with any one attending party.
d) When adding new parties to a conference and while speaking privately to a particular conference member
other members of the conference will be connected to Music On Hold.
e) Each of the calls involved in a holding conference will be placed on Exclusive Hold.
f) When the controlling party exits a conference, the most recently invited internal party will be designated as
the new controlling party.
g) When a conference is established, each party will hear a burst of conference tone when the Conference
Tone is enabled.
To Next Page
Loading...
