DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-47
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Program an extension for External Call Forward (Index 01-101~156-18):
• Input 01-101~156-18 (for the extension number to program).
• Press [
save
savesave
save]. This advances to the selected extension ECF database item.
• Press [chg
chgchg
chg] until the appropriate value displays.
• Press
the Volume button (up or down) to return to the DB Item Select screen.
Program the various system External Call Forward parameters:
• Input 03-32-01 to program the appropriate Service Mode for use with External Call Forward.
• Press [
save
savesave
save]. This advances to the ECF Service Mode database item.
• Press [chg
chgchg
chg] to until the appropriate value displays.
• Press [next
nextnext
next] to advance to External Call Forward Talk Time.
• Press [chg
chgchg
chg] until the appropriate value displays.
• Continue making other database changes.
• Exit programming mode when changes are complete.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu.
Program the extension for the ability to use External Call Forward:
• Use
¢£¤¥ to highlight “Extension.” Then press «.
• Use ¢£¤¥ to highlight “Category 2.” Then press «.
• Use
¢£¤¥ to highlight “ECF Operation.”
• Then press « until the appropriate value displays.
• Continue making changes for other extensions as required.
• When you have completed all changes, press the
° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
To Next Page
Loading...
