GCA70258 LCD Speakerphone Station User’s Guide
August, 03 Comdial 59
5. CHOOSE your speed dial route from
the following list:
• PRESS line button to select outside
line,
• DIAL 00 to select prime line or last
line used,
• DIAL 01 to 16 to select line
group,
• PRESS INTERCOM button or dial 8 to select intercom.
6. DIAL number (up to 16 digits long).
7. SELECT SAVE to store the number.
8. REPEAT previous steps until all
numbers are stored, OR SELECT
EXIT.
9. PRESS SPEAKER to end.
Note: You may need a pause between numbers to compensate for
differences in response time between your system and the host sys
-
tem (ask your attendant about this). To store a pause, press HOLD,
then continue dialing.
If your system is behind a host system that needs
a hookflash to access a feature, press TAP to store a hookflash, then
continue dialing.
EXIT
To Next Page
Loading...
