16
ENGLISH
7 Description
• The fans must not be covered in order to prevent overheating.
• The light source is equipped with an automatic safety device which stops the light intensity
in case of excessive internal temperature.
7.1 Description of fans
The power supply of the device is realised by means of a mains transformer supplied with the
system.
7.2 Mains transformer plug
The specifications and symbols at the bottom of the product allow identification of the led
light source complying with the international standards IEC 60601-1, IEC 60601-2-18, IEC
60417 and EN 980 (see annex 1).
7.3 Specifications and symbols on the product
To Next Page
Loading...