COMECO RT38 - Product Specifications; Warranty and Support Information

Specifications
12
Case
Input
Output
Power Supply
Excitation Voltage
Consumption
Measurement Error
Temperature Drift
Ambient Temperature / Humidity
Protection Class: front / terminals
 'B',  'H',  'V',  'S',  'L',  'M',  'R'
 RTD,  thermocouple,
 current,  voltage
 relay 5A/250VAC with NO/NC or NO contact,
 SSR 1A/250VAC,  SSR 0.2A/250VAC,
 MOS gate 0.1A/60V, optically isolated,
 5...24 VDC, 30 mA for external SSR
 230 VAC,  90…250 VAC/DC,
 24 VDC,  12...24 VAC/DC,
 9 VAC,  .....................................
 ≤ U
p
(DC); ≤1.2*U
p
(AC),  24 VDC, 30 mA,
 .............................................
less than 1.5 VA
≤ ± 0.3% from span
≤ ± 0.02% from span for 1 °C
-10…65 °C / 0…85% RH, non-condensing
 IP65,  IP54,  IP44 / IP20
Warranty and Support
………………………….
serial number
………………………….
manufacturing date
QC check mark …….……(passed)
(stamp)
88 Slavyanska Str.
P.O.Box 378
Plovdiv 4000, BULGARIA
tel: +359 32 646523, 646524
fax: +359 32 634089, 646517
e-mail: support@comeco.org
QD-8.2.4-WC
Warranty
COMECO warrants this product
to be free from defects in materials
and workmanship for 2 years. If your unit
is found to be defective within that time,
we will promptly repair or replace it.
This warranty does not cover accidental
damage, wear or tear, or consequential
or incidental loss. This warranty
does not cover any defects caused
by wrong transportation, storage, installation,
or operating (see 'Specifications').
Technical support
In the unlikely event that you encounter
a problem with your COMECO device,
please call your local dealer or contact
directly our support team.