Need help?Do you have a question about the Comelit 3348B and is the answer not in the manual?
Lists and describes the terminal block connections and their functions for the module.
Details the procedure for setting the master code for programming and system access.
Explains how to program unique codes for activating relays, including modes and examples.
Describes how to activate relays using the previously programmed codes.
Outlines the steps to remove stored relay codes from the system's memory.
Explains the two operational modes for relays: bistable (on/off) and monostable (timed).
Details how to change the timed duration for monostable relay operation.
Describes how to activate a function that sends an alarm discreetly when codes are entered.
Configures the number of incorrect code entries before the unit locks.
Sets the activation time for relay 1 when triggered by a remote key input.
Programs a relay to act as a generic actuator command from the Simplebus system.
Outlines the steps to remove the programmed actuator function.
Describes how to activate relay 1 by pressing the "key" button without entering a code.
Explains how closing the RK contact activates relay 1 for a set time.
Provides general information about codes, outputs, operation modes, and product dimensions.
Details power supply, consumption, and contact capacity.
To Next Page
General