Comet FDX BLADE XL Series - SPECIFICATIONS AND TECHNICAL DATA; CAUTION

19
EN
WARNING
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read and keep in mind that indicated in the
INSTRUCTION MANUAL  SAFETY WARNINGS.
SPECIFICATIONS AND TECHNICAL DATA
CAUTION
• For the engine to reach its maximum power it needs at least 10 hours running-in at a load 15 to 20% lower than
the machine’s maximum performance.
• The engine’s maximum power diminishes as the altitude and ambient temperature at which it is working increases
(there is a drop of about: 3.5% every 305 m/1000 ft above sea level and 1% every 5.6°C/42°F above 16°C/61°F). If
the high pressure water cleaner is used at a high altitude or with high ambient temperature please refer to the
engine’s operating and maintenance manual to see if any precautions need to be taken.
• The declared performance refers to an atmospheric pressure of 1013 hPa at sea level and an ambient temperature
of 16°C/61°F.
• If the high pressure cleaner is not connected to the water mains but takes water from a tank, in certain conditions
the thermostat valve can open and prevent the complete self-priming of the pump. In these cases, t a rubber
hose into the hose connection of the thermostatic valve and bring the other end of the hose to the tank from
where the pump takes the water.
• The specications and technical data are approximate. The manufacturer reserves the right to make all changes
to the machine it deems appropriate.
FDX BLADE XL / PRO
7.14 14/200D 9.16 16/200G 9.15 15/220G 13.15 15/310G
13.16
16/280G
15/280G
MOTORISATION
YANMAR L70N HONDA GX270 LONCIN G390F HONDA GX390 HONDA GX390 LONCIN G390F
HONDA GX390
Fuel
Diesel
Petrol
Power (kW - HP)
5,5 - 7,5 6,7 - 9,0 9,6 - 13,0
Nominal rotation speed - maximum (RPM)
3400 - 3600
HYDRAULIC CIRCUIT
Maximum supply water temperature (°C - °F)
60 - 140
Minimum supply water temperature (°C - °F)
5 - 41
Minimum supply water ow rate (l/min - USgpm) 18 - 4,8 21 - 5,5 20 - 5,3 21 - 5,5 20 - 5,3
Maximum supply water pressure (bar - psi) 8 - 116
Maximum priming depth (m - ft) 0,5 - 1,7 No 0,5 - 1,7
PERFORMANCE
Maximum ow rate (l/min - USgpm)
14 -3,7 16 - 4,2 15 - 4,0 16 - 4,2 15 - 4,0
Nominal ow rate (l/min - USgpm) 13,1 - 3,5 14,7 - 3,9 14 - 3,7 14,7 - 3,9 14 - 3,7
Maximum pressure (bar - psi) 200 - 2900 220 - 3191 310 - 4496 280 - 4061
Nominal pressure (bar - psi)
190 - 2756 210 - 3045 290 - 4206 255 - 3699
Maximum reaction force on the spray gun (N) 28 41 50 54 51 50
Sound pressure level - Uncertainty (dB(A)) 92,8 – 0,7
(1)
Sound power level (dB(A)) 106
(1)
Operator hand-arm vibration - Uncertainty (m/s
2
) 11 – 0,24
(1)
PUMP OIL ENI MULTITECH THT
(2)
WEIGHT AND DIMENSIONS
Length x width x height (mm - in) (mm - in) 850x580x1050 - 33,5x23x41
Weight (kg - lb) 48 - 106 50 - 110 48 - 106 50 - 110 52 - 115
(1)
Measurements in agreement with EN 60335-2-79.
(2)
Also see the corresponding oils table.
EN