EasyManua.ls Logo

Comfast CFE312A User Manual

Comfast CFE312A
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ComfastQuickStartGuideCOMFASTCFE312A
Page|1
V1.0
ComfastHighSpeedWirelessBridge
ForIPSecurityCameras
5.8GHZ@300Mbpsto1KM
QUICKSTARTGUIDE
Question and Answer IconNeed help?

Do you have a question about the Comfast CFE312A and is the answer not in the manual?

Comfast CFE312A Specifications

General IconGeneral
BrandComfast
ModelCFE312A
CategoryNetwork Hardware
LanguageEnglish

Summary

Getting Started with Bridge Connection

Overview of Bridge Connection Goal

Explains the objective of establishing a wireless bridge connection for IP security cameras.

Step 1: Hardware Setup

Guides through the initial physical connection and powering of the wireless bridge antennas.

Step 2: Software Configuration

Accessing Antenna Interface

Details on logging into the antenna's web interface using default credentials.

Modifying PC IP Address for Access

Instructions to change the computer's IP address to match the antenna's network range.

Master Antenna Configuration Details

Changing Master Antenna Network IP

Steps to set a unique IP address for the master antenna and disable DHCP.

Configuring Bridge Mode via Wizard

Using the device's wizard to select and configure bridge mode settings.

Setting Wireless Network Parameters

Configuration of SSID, password, and other wireless parameters for the master antenna.

Slave Antenna Configuration and Pairing

Setting Slave Antenna IP Address

Assigning a unique IP address to the slave antenna, different from the master.

Pairing Slave to Master Antenna

Scanning for the master antenna and establishing the wireless bridge connection.

Computer IP Address Adjustment Guide

Prerequisites for Antenna Configuration

Explains the necessity of matching PC IP to the antenna network for access.