About Power Connection
Please look at the rating label to know the rating voltage and connect the
dishwasher to the appropriate power supply. Individual,properly polarized and
grounded 10-amp (minimum) branch circuit fused with 10-amp (minium) time-delay
fuse or circuit breaker.
Ensure the voltage and frequency of the power being corresponds to those on
the rating plate. Only insert the plug into an electrical socket which is grounded
properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug , replace the socket, rather than using adaptors or the
like as they could cause overheating and burns.
Electrical Requirements
Electrical Connection
Ensure that proper grounding
exists before use
WARNING
For personal safety:
Do not use an extension cord or an adapter plug
with this appliance.
Do not, under any circumstances, cut or remove
the ground connection from the power cord.
Water Connection
-
Faucet Adapter
1
2
3
Take the existing aerator off your faucet.
1
Aerator
Locking Collar
Screw the faucet adapter onto (or into) the faucet tap. Check for leaks (Use Teflon tape
2
Take the existing aerator off your faucet.
Attach the quick connect onto the faucet adapter by pulling down the locking collar.
Slowly open the hot water line and check for any sign of water leaks at all hose connections.
3
4
IMPORTANT: Please confirm whether the supplied adapter is suitable for your
faucet tap. If not, please contact our customer service where adapter is
Customer Service Phone: 1-866-646-4332
available for purchase.
Then pull up the locking collar to fix the connection.
-11
-
To Next Page
Loading...
Need help?
General
