Connection of drain hoses
the hose in place.(Note: the hose will shift when water is running if not secured)
need to be drained to be moved or relocated.
Caution
The drain hose must be correctly fitted to avoid water leaks. Ensure that the water
drain hose is not kinked or crushed.
The clamps must be tightened with a screwdriver.
Or
33
ubber
stopper
1 2
Fix the drain pipe with suction cups
-12
-
1.Remove the rubber stopper.
The dishwasher drain hose should not be installed higher than 39 1/4"(1m) from
the surface that the dishwasher is sitting on to prevent performance issues.
Note: If the drain hose is routed above the dishwasher it will haold water,and will
2.Fix the drain pipe with the back pipe of the machine.The interface is fitted with
clamps and tightened with a screwdriver.
3.Place the free end of drain hose into a sink or bucket.Use the suction cup to hold
Caution:Do not extend the dishwasher hose more than 13" or 33cm to prevent
the supplied drain hose.
performance issues. Any extension should be of the same material and diameter as
To Next Page
Loading...
