Comfee CDC17P0ABB User Manual

QUICK START GUIDE
Please read the entire manual for detailed operating instructions.
Connecting to Power Supply
The power required is 120VAC 60Hz, 10Amp circuit.
Place the end of the drain Hose into a sink or bucket.
Adding Water to the Tank
The water tap symbol will be on if there is not enough water in the tank.
until the unit beeps rapidly for 3 seconds and is off, which means the tank is filled.
There are two ways to add water into the tank:
1
2
Add water into the tank automatically by connecting inlet hose to the tap.
Open the cap and slowly add water into the tank manually by using water container.
Note:
Before adding water, you need to press the power
button to turn on the diswasher
The water tap symbol will be on if there is not enough water in the tank. Add water
IMPORTANT:
Drain hose installation
The clamp must be tightened by a screwdriver.
Fix the drain pipe with
suction cups
Or
33
ubber
1 2
or
2
or
1
Water Inlet
Drain Pipe
Faucet Adapter

Comfee CDC17P0ABB Specifications

General

Brand	Comfee
Model	CDC17P0ABB
Category	Dishwasher
Language	English