Problem Possible Causes What To Do
The dishes were not
loaded correctly
See notes in " Loading the Dishwasher Baskets "
The dishes
are not clean
Cloudiness
on glassware
Black or gray
marks on dishes
Detergent left in
dispenser cups
The dishes
are not drying
Select a more intensive programme
See" WashCycle Table "
Use more detergent or change your detergent
Rearrange the items so that the spray can rotate freely
Clean and/or fit the filter combination correctly
Clean the spray arm jets See "Cleaning the Spray
Arms"
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean
Use a mild abrasive cleaner to eliminate those marks
Re-loading the dishes properly
Load the dishwasher as suggested in the directions
!ncrease the amount of rinse-aid/Refill the rinse-aid
dispenser
Do not empty your dishwasher immediately after
washing Open the door slightly so that the steam can
escape Begin unloading the dishwasher only once t
he dishes are barely warm to the touch Empty the low
basket first This prevents water form dropping off
dishes in the upper basket
!n short program the washing temperature is lower
This also lowers cleaning performance Choose a
program with a long washing time
Water drainage is more difficult with these items
Cutlery or dishes of this type are not suitable for
washing in the dishwasher
The program was
not powerful enough
Not enough detergent
was dispensed
!tem are blocking
the path of spray arms
The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted
This may cause
the spray arm jets
to get blocked
Combination of soft
water and too much
detergent
Aluminum utensils
have rubbed against
dishes
Dishes block
detergent cups
!mproper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
selection
Using cutlery with
a low-quality coating
Error Codes
WARN!NG!
!f overflow occurs turn off the main water supply before calling a service
!f there is water in the base pan because of an overfill or small leak
the water should be removed before restarting the dishwasher
Poor
Washing
Result
18
Poor
Drying
Result
When some malfunctions come on the appliance will display error codes to warn you:
Codes
Meanings
Possible Causes
E1
Longer inlet time
Faucets is not opened or water intake is restricted
or water pressure is too low
E3
To Next Page
Loading...
