A Fill the Rinse Aid Dispenser
3 Before First Use
As the rinse aid diminishes the size of the black dot
on the rinse aid level indicator changes as illustrated below
Full
3 / full
1 / 2 full
1 / full - Should refill to eliminate spotting
Empty
C (Rinse-Aid indicator)
the rinse aid get below 1 / full
Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes That can leave
spots and streaks !t also improves drying by allowing water to slide off the dishes Your dishwasher is designed to
use liquid rinse aids The rinse aid dispenser is located inside the door next to the detergent dispenser To fill the
dispenser open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black
The volume of the rinse aid container is about 110ml
Function of Rinse Aid
Rinse aid is automatically added during the last rinse ensuring thorough rinsing and spot and streak free drying
Attention!
Only use branded rinse aid for dishwasher Never fill the rinse aid dispenser with any other substances
(e g Dishwasher cleaning agent liquid detergent) This would damage the appliance
When to Refill the Rinse Aid Dispenser
!f there is no rinse-aid warning light in the control panel you can judge the amount of rinse-aid by the color
of the optical level indicator
"
C
"
located next to the cap When the rinse-aid container is full the whole
indicator will be dark As the rinse-aid diminishes the size of the dark dot decreases You should never let
Pour the rinse aid into the dispenser being careful not to overfill
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow
1
2
3
2
3
1
To open the dispenser turn the cap to the "open" (left) arrow and lift it out
NOTE:
Clean up any rinse aid spilled during filling with an absorbent cloth to avoid excessive foaming
during the next wash. Don't forget to replace the cap before you close dishwasher door
3
To Next Page
Loading...
Need help?
General
