7
OPERATION INSTRUCTIONS
TO REMOVE THE FILTER:
1. Do not attempt to remove filter until the unit has cooled completely. Open the lid and
press in each of the two tabs on the front of the spout to release the filter. From inside
the kettle, grasp the angled tab on the filter and pull upward.
The filter should slide out easily.
2. Wash and rinse the filter, then replace.
REMOVING/INSERTING THE FILTER
TO INSERT THE FILTER:
1. Open the lid.
2. Grasping the filter at the angled tab, insert the bottom tab first followed by the top two
tabs on the filter. Slide the filter into the slots on the inside of the spout until the filter
sits securely into place.
3. Once the filter is securely in place, the kettle will be ready for use.
To Next Page
Loading...
