EasyManua.ls Logo

Comfort Bilt Alpine HP40 - User Manual

Default Icon
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
H P 4 0 P E L L E T S T O V E
O W N E R ' S M A N U A L
Please read this entire manual before installation and use of this fuel-burning pellet room heater, and save for future reference.
Failure to follow these instructions could result in property damage, bodily injury, or even death.
Contact local building or fire officials about restrictions and installation inspection requirements in your area.
WARNING!
Building Quality
Building Quality
Building Quality
Comforts
Comforts
Comforts
Question and Answer IconNeed help?

Do you have a question about the Comfort Bilt Alpine HP40 and is the answer not in the manual?

Summary

Stay Safe: Essential Warnings and Precautions

Safety Alert Key Definitions

Defines safety alert levels like DANGER, WARNING, CAUTION, NOTICE, Pro Tip for understanding manual warnings.

Fire and Hot Surface Hazard Warnings

Covers critical risks related to fire hazards, hot surfaces, and burn prevention.

General Safety Precautions and Recommendations

Advises on safe usage, installation requirements, and smoke/CO detector placement.

Operational Safety Notices

Details safe procedures during power outages, overheating, and proper shutdown.

California Proposition 65 Health Warning

Informs about chemicals known to cause cancer or birth defects, requiring specific handling.

Getting Started: Initial Setup and Components

Identify Stove Components

Identifies key components of the pellet stove through a labeled diagram.

Included Items and Tools Needed

Lists all items included with the pellet stove package and necessary tools for installation.

Pellet Vent Pipe Requirements

Specifies the required type and size of pellet vent pipe for safe operation.

Installation Guide: Safe and Compliant Setup

Pre-Installation and Unpacking Procedures

Details steps for unpacking, inspecting, and preparing the stove for installation.

Control Panel Mounting and Connection

Provides instructions for mounting the control panel bracket and connecting its data cable.

Stove Placement and Clearance Requirements

Discusses considerations for stove placement, including wall studs, clearances, and surge protection.

Floor Protection and Combustible Clearances

Outlines requirements for non-combustible floor protection around the stove.

Clearances to Combustibles

Specifies required clearances to combustible materials for safe installation.

Vent Termination Clearances

Details required clearances for vent termination outside the building.

Venting Installation and Air Intake

Discusses proper venting installation, types, precautions, and outside air intake.

Equivalent Vent Length (EVL) Considerations

Defines EVL and provides a chart for vent component resistance.

Horizontal, Vertical, and Mobile Home Installations

Illustrates horizontal, vertical, and mobile home installation configurations.

Specialized Installation Methods

Covers through-roof, Class A chimney retrofit, and masonry fireplace installations.

Operation: Using Your Pellet Stove

Fuel Guide: Pellet Selection and Storage

Provides guidance on selecting and storing wood pellets for optimal stove performance.

Getting Ready: Startup Sequence Overview

Outlines the initial startup sequence and what to expect during operation.

Control Panel Button Functions

Details the functions of each button and indicator on the control panel.

Control Panel Display Interpretation

Explains the meaning of each display element and icon on the control panel.

Pre-Ignition Checklist and Procedure

Provides a step-by-step guide to follow before igniting the stove.

Operational Modes Explained

Describes the different operating modes (Manual, Temp, Weekly, Thstat) for the stove.

Thermostat Connection and Remote Control

Covers thermostat connection and operation of the remote control.

Starting the Stove and Fire Appearance

Guides on starting the stove, interpreting information screens, and identifying a good fire.

Stove Settings and Configuration Menu

Introduces the various settings that can be adjusted on the stove's control panel.

Detailed Settings: General, Weekly, Combustion

Details General, Weekly Schedule, and Combustion settings.

Advanced Settings: Ash Cleaning, ECO, Diagnosis

Explains Ash Cleaning Cycle, ECO mode, and diagnostic testing features.

System Settings: Safe Mode, Information, Reset

Covers Safe Mode, information viewing, blower settings, and resetting the unit.

Maintenance: Cleaning and Upkeep

Side Panel Access for Cleaning

Guides users on how to access internal components for cleaning and maintenance.

General Stove Cleaning Procedures

Provides general advice on regular cleaning for optimal performance and longevity.

Burn Pot Cleaning and Inspection

Details the procedure for cleaning, inspecting, and reseating the burn pot.

Interior Chamber and Ash Pan Cleaning

Instructions for cleaning the stove's interior chamber and handling the ash pan.

Front Door Glass Cleaning and Gasket Check

Steps for cleaning the stove's front glass door and inspecting door gaskets.

Exhaust Chambers and Blower Housing Maintenance

Procedure for cleaning exhaust chambers and annual inspection of venting/blower components.

Troubleshooting: Resolving Common Issues

Troubleshooting Resources and Videos

Provides links to video guides and written resources for troubleshooting common issues.

Total Power Loss Diagnosis

Diagnoses and resolves issues related to complete power loss to the control panel.

Low Temperature Alarm Troubleshooting

Addresses low temperature alarms, often related to hopper or feeder issues.

High Temperature and Overheat Alarms

Explains causes and solutions for high temperature or overheat alarms.

Failure to Ignite Troubleshooting

Guides on troubleshooting ignition failures and ensuring proper heat generation.

Poor Flame Quality and Emissions Issues

Addresses issues causing poor flame quality, dark smoke, or ash buildup.

Auger Feed and Lost Connect Alarms

Solves auger feeding problems and communication loss alarms between control panel and board.

Room Temperature Errors and Overheating

Diagnoses room temperature sensor errors and provides solutions for excessive room heat.

Certifications and Specifications

BTU, Efficiency, and Port Specifications

Details the stove's emissions, BTU output, heating capacity, and port sizes.

Electrical Ratings and Glass Specifications

Lists electrical ratings for components and notes the type of glass used.

Comfortbilt Limited Warranty Information

Outlines the warranty terms, coverage periods, and exclusions for the stove.

Wiring Diagram: Electrical Connections

Stove Electrical Wiring Diagram

Illustrates the electrical connections between major components of the stove.

Replacement Parts: Ordering and Identification

Available Replacement Parts List

Lists available replacement parts with their corresponding part IDs for ordering.

Schedules and Repairs Log: Maintenance Tracking

Maintenance and Repair Activity Log

Provides blank space to record scheduled maintenance and performed repairs.

Comfort Bilt Alpine HP40 Specifications

General IconGeneral
TypePellet Stove
Heating Capacity2, 000 sq ft
Fuel TypeWood Pellets
BTU Output40, 000 BTU
Burn TimeUp to 24 hours
EPA CertifiedYes
Blower IncludedYes
Vent Size3"

Related product manuals