Comfort Bilt HP21 - User Manual

H P 2 1 P E L L E T S T O V E
O W N E R ' S M A N U A L
Please read this entire manual before installation and use of this fuel-burning pellet room heater, and save for future reference.
Failure to follow these instructions could result in property damage, bodily injury, or even death.
Contact local building or fire officials about restrictions and installation inspection requirements in your area.
WARNING!
Building Quality
Building Quality
Building Quality
Comforts
Comforts
Comforts

Summary

INSTALLATION

Floor Protection

Specifies requirements for floor protection and clearances around the stove.

Clearances to Combustibles

Outlines required clearances from the stove to combustible materials.

Vent Termination Clearances

Details required clearances for the vent termination point outside the building.

Venting System Installation

Explains how to properly install the pellet venting system and connect it to the stove.

OPERATION

Control Panel and Display Usage

Explains control panel buttons, display indicators, and information screens.

Pre-Ignition Checklist

Lists essential checks before starting the stove's ignition sequence.

Operational Modes and Settings

Explains operational modes, settings, and remote control usage.

MAINTENANCE

TROUBLESHOOTING

Power, Temperature, and Ignition Alarms

Airflow, Communication, and Room Errors

Comfort Bilt HP21 Specifications

General

Type	Pellet Stove
Fuel Type	Wood Pellets
Hopper Capacity	55 lbs
Ignition	Automatic
Thermostat	Yes
Ash Pan Capacity	Large
Warranty	1 year
Burn Time	Up to 24 hours
Venting	3" vent pipe