To Next PageTo Next Page
Need help?Do you have a question about the Comfort Bilt HP21-SS and is the answer not in the manual?
General| Brand | Comfort Bilt |
|---|---|
| Model | HP21-SS |
| Category | Stove |
| Language | English |
Warns about hot surfaces and glass, advising supervision of children.
Warns against installing the stove in sleeping rooms due to oxygen consumption.
Lists materials not to burn due to toxic fumes or poor performance.
Lists fire safety steps, including keeping combustibles away and door closure.
Identifies and explains the functions of each button on the control panel.
Explains the various indicators and information displayed on the control panel screen.
A step-by-step checklist before starting the ignition sequence.
Describes the Manual, Temp, Weekly, and Thstat operating modes.
Explains the functions of the remote control buttons for stove operation.
Emphasizes regular cleaning for stove performance and longevity.
Provides safety warnings for cleaning, such as unit cooling and power disconnection.
Instructions for cleaning the heat exchanger using the pre-installed scraper.
Warns against touching the scraper rod while the stove is hot.
Instructions for cleaning the burn pot, ensuring airflow holes are clear.
Details safe containment and disposal of ashes from the ash pan.
Instructions for cleaning the interior chamber and vacuuming beneath the burn pot.
Guides on cleaning the stove door glass and inspecting gaskets.
Lists cautions regarding glass and door handling, and approved replacement parts.
Instructions for removing and cleaning rear exhaust chambers every ton of pellets.
Details inspection and cleaning of exhaust venting and blower housing.
Reaffirms safety precautions when performing maintenance.
Explains how to clear fault codes and error messages from the main screen.
Identifies causes and solutions for a total power loss at the control panel.
Explains the low temperature alarm and its common causes and solutions.
Identifies causes and solutions for high temperature or overheat alarms.
Explains failure to ignite messages and potential solutions.
Discusses issues with flame quality and smoke reduction due to airflow.
Addresses issues where the stove operates but does not feed pellets.
Explains the "Lost Connect" alert and troubleshooting steps for communication issues.
Discusses the "ERR" display related to room temperature sensor issues.
Outlines the terms and conditions of the Comfortbilt limited warranty.
Illustrates the connections to the main motherboard and circuit board.
Details the wiring harness connections for various stove components.
Shows connections for power supply, switches, and control panel.
