English - 12
SETTING UP THE YARRA 3DX
Option 2: Optical
If your TV doesn’t have an HDMI™ ARC port, use the optical cable to connect the soundbar to your TV.
CAUTION: Make sure you have removed the protective cap from both ends of the optical cable. Inserting the
plug in the wrong orientation can damage the plug and/or the connector.
1. Insert one end of the optical cable into your TV’s OPTICAL OUT port.
2. Align the plug with the soundbar’s OPTICAL IN port and insert the plug carefully.
Note: The port has a hinged door that swings inward when inserting the plug.
3. Firmly push the plug into the port until you hear or feel a click.
To Next Page