Commax CAV-43MG - Page 8

7
①
In Setting mode to move DOOR VIDEO SET please press SELECT button
Press UP/DOWN button to move RESET category.
②
Press SELECT button to select category.
③
Press UP/DOWN button to select YES.
④
Press SELECT button
[Precaution: Screen Setting and Reset functions must be adjust separately ( DOOR / LOBBY )]
(5) EXIT : Return to previous MENU.
5-1-2. UTILITY (Other Functions)
5-1의 In Screen Setting Mode move to UTILITY Option and press SELECT button to enter
to the MENU.
(1) SPEAKER VOLUME : Adjust the volume for receiver sound
※ Setting Method
①
In Setting Mode to move UTILITY option and press SELECT button to control UP/DOWN
button to move SPEAK-VOLUME category.
②
Press SELECT button to select category.
③
Press UP/DOWN button to set Volume control.
④
When you set, press SELECT button to save
(2) SCREEN MODE : to set screen ratio
①
5-1In Setting Mode to move UTILITY category and press SELECT button to move
SCREEN MODEL by UP/DOWN button.
②
Press SELECT button to select category.
③
Press UP/DOWN button to set screen rate and then please press SELECT button to save.
- ZOOM: 4:3 Ratio ZOOM IN (Expanded image of Real Rate),
- 4:3: Real Ratio of the Camera Image.
- WIDE: Image of 16:9 Ratio will be shown on the screen.
(3) EXIT : Return to previous MENU.
5-1-3. CHIME-BELL VOLUME
In Screen Setting Mode move to UTILITY Option and press SELECT button to enter to the MENU.
UP Button ( OPEN ) DOWN Button ( GUARD ) UTILITY ( EXTRA FUNCTION & INFORMATION )
(1) CHIME-BELL VOLUME : To set calling mute and adjust volume
※ Setting Method
①
5-1-2 Move to UTILITY category and press SELECT button(Monitor) to move
CHIME-BELL VOLUME by UP/DOWN button.
④
After adjusting, press the SELECT button and save the setup.
(4) RESET : It initializes the screen setup.
※ Setting Method